LSM 30 (Inch)

RSM + HDM Carbide Tooth (Part #20007501). Carbide-tipped tooth and bolt designed for even the roughest working conditions. The Carbide Tooth can be used interchangeably with any models that use Quad Teeth.

RHP Standard Upper Bullet Bit (Part# 0656) for the upper side of the RHP Brushcutter disc. Comes with a retaining Snap Ring.

Also shown: Standard Upper Mounting Block (Part# 0657). Weld on mounting block for the upper side of the RHP Brushcutter disc.

RHP models: 36” – QTY 6 | 52” – QTY 8

Wide Quad Tooth (image left) (Part # 12534W) and Quad tooth (image right) (Part #12534). Bolt and nut (Part # 13684). Works on Promac RSM Brushcutters (36” and 48”) and Promac HDM Brushmulchers (36″, 48” and 60”).

RSM models: 36” – QTY 8 | 52” – QTY 12
HDM models: 36″ – QTY 18 | 48” – QTY 26 | 60” – QTY 30

Heavy Duty Flail Tooth (Part #12800SPW). Carbide-tipped wide flail tooth. Flail Bolt Package (Part #17034) comes with bolt, bushing, nut and washers.

HDF models: 36” – QTY 16 | 48” – QTY 18 | 60” – QTY 26

Heavy Duty Bullet Bit (Part# 1009). Comes with Heavy Duty Mounting Block that is welded to the bottom of the RHP Brushcutter (Part #10010). Used on both RHP models.

RHP models: 36” – QTY 6 | 52” – QTY 12

RHP Quad Tooth (Part #13559). This Quad Tooth bit can replace the standard Heavy Duty Bullet Bit on the RHP Brushcutter. Requires Tooth Bolt and nut (Part #102873), Tooth Bushing (Part #102872).

RHP models: 36” – QTY 6 | 52” – QTY 12

RHP optional cup style cutter bit (Part # PBC 10012) for Bottom side of disc.  Comes with locking nut. Mounting block (Part # PBC 10010) Weld on mounting block for bottom side of RHP disc.

RHP Models: 36” – QTY (6), 52” – QTY (12)

Standard Tooth on all CPR rotors (Chipper tooth Part # 20003001)

LDM models: 30” – QTY (18), 40” – QTY (22), 50” – QTY (26) HDM models: 36” – QTY (22), 48” – QTY (28), 60” – QTY (34)

RHP Outer Cutting Knife (Part #0653SP). Heavy-duty outer bit that comes with mounting bolt and nut.

RHP models: 36” – QTY 6 | 52” – QTY 8

Standard Cup Bit (Part #102871). Replacement for the standard Heavy Duty Bullet Bits on the RHP Brushcutter. Includes RHP Tooth Bolt and nut (Part #102873), RHP Tooth Bushing (Part #102872).

RHP models: 36” – QTY 6 | 52” – QTY 12

Three Blade Disc. These blades come in two different sizes to fit the 36” and the 52” RGP Brushcutter. They also include the option of Standard Blade (36” Part #B350 | 52” Part #B22016) and Heavy Duty Blade (36” Part #B350A | 52” Part #B22016A). Heavy Duty, thicker blades are available. The 1” thick 52” Blade (Part #17142) have the longest life and production of any of our blades (these require Blade Bolt Part #17141).

Parts include: Blade Bolt (36” Part #B3511 | 52” Part #B2211), Blade Bolt Washer (36” Part #B3512 | 52” Part #B2213), Blade Bolt Bushing (36” Part #A3522 | 52” Part #A222), Stove Lock Nut (36” S40918 | 52” Part #D40918).

Carbide-tipped Mulching Bit (Part #12690) Durabit. Comes with nut. Durabit Bushing (copper in the middle) (Part #12689). Durabit Holder (Part #12688).

RSM models: 36” – QTY 60 | 52” – QTY 96